Avermedia EXR6004 Manual de usuario descargar pdf (Pagina 34)

IP Setting: Click IP setting to add the IP camera.

1. Click the radio button of Protocol to start setup IP camera.

2. Select the Protocol, Model, Video Format, and Channel of the IP camera.

3. Enter IP address and connecting port in IP Camera Site column.

4. Also, user can enter URL of IP camera instead of IP address.

5. If the IP camera has authority request, please enable Authentication and enter ID and

Password.

6. Click OK to connect with the IP camera.

Detail: To adjust IP camera parameters, click Detail. Click Default will back to the factory default

value.

User can select Video size, Frame rate, Bitrate mode and Quality of camera. Also, user can adjust

Bright, Contrast, Hue, Saturation, and I/O Control of the camera.

The selection and adjustment items may vary by the camera supported.

I/O Control: Setup the sensor and relay that is embedded on the IP camera.

 Sensor Setting

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 116 117

Sin comentarios

Avermedia EXR6004 Manual de usuario Pagina 34