Avermedia EXR6004 Manual de usuario descargar pdf (Pagina 40)

3.4 Network Setup

Click Default will back to the factory default value.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(1) Server Name

Assign a name for the DVR unit. Alphabet letters and numbers only.

(2) Transmitting Cameras

Select and click on the camera number in the Transmitting Camera section you want to make it

accessible via internet using WebViewer, Remote Console, CM3000(Gold),PDA Viewer and JAVAViewer

(still image). To select all the cameras, enable the ALL check box.

(3) Main Configuration

Set the DVR IP address and Remote Console Port. You need this when accessing DVR server from the

remote location via internet.

The DVR system supports dual LANs; therefore, user can select the Server IP from the drop-down list

and click Setting to configure the detail. The dual LAN ports can balance network bandwidth to avoid the

network traffic congestion.

- The default IP of the DVR server is 192.168.2.2 for LAN1 (lower LAN port in the back of the DVR) and

192.168.3.2 for LAN2 (upper LAN port in the back of the DVR).

- LAN1 can be set as Static or DHCP mode and only for LAN connection.

- LAN2 can be set as Static, DHCP, or PPOE mode and for both WAN and LAN connection.

When only using port LAN2, please set IP address of port LAN 1 in different LAN segment from port LAN 2.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 116 117

Sin comentarios

Avermedia EXR6004 Manual de usuario Pagina 40